Description
Note:
Note:This item only reinforce 220V
Parameter ：
1.Power supply:220V
2.Working Voltage:DC48V
3.Working Current:4.8A-5A
4.Power: 360W
5.Output power:250W
6.Spray volume: 3500- 5000ML / H
7.Cooling model :Air-cooled
8.Shell Material: 304 stainless steel shell, shell polished surface treatment
Kind Remind:
1. When the atomizer work, please do not put your hand over the top of the atomizer spray chamber to prevent ultrasonic wounded.
2. Nebulizer will have to be working in the water in order, before the use of the water and then put it in its power, and to make sure that there is water in a spray film surface state, so as to avoid damage to the nebulizer.
3. When you stop the use of the nebulizer before disconnect the power, then remove from the water atomizer.
4. When the use of the nebulizer, please use the output power of more than 250W, the output voltage is DC45 ± 5V supply.
5. When generating a plurality of atomizer is set the use of the same container, each with a separate power supply need not connect a plurality of the nebulizer for use with a single power supply, and note the respective atomizer are mutually conductive housing, so as to prevent the work galvanic corrosion.
6. Mist generated by the nebulizer will have to use fan forced discharge, and each group of nebulizer reserved 350CM2 of flat space, the water temperature is too high to avoid shortening the life of the nebulizer.
7. Nebulizer not suitable for corrosive liquid atomization, to avoid damage to the atomizer and atomized metal sheet.
8. Do not damaged right through installation level sensor switch, switch failure caused the water level to prevent runaway nebulizer. Level switch will have to stop after the damage, in a different way there will be further damaged dry atomized piece atomizer. At this point so as to use the required repairs by qualified service personnel after a good.
Atomized water quality and adaptable, the same nebulizer use pure water or tap water can work.The machine current voltage and temperature by less influence, because each nozzle current electronic automatic adjustment, the current increasing temperature will decrease (does not have an effect on the amount of fog), to avoid serious power tube heat current increasing the vicious cycle and damage the atomizer
The power for a wide range of products to make sure that the changes in the city still under normal use larger occasions .This product uses high thermal conductivity, high corrosion resistance, good mechanical strength of the metal shell, reducing the temperature difference between the water inside the host, thereby prolonging the life of the product
With power supply polarity protection circuit prevents damage to the product user interface instead (reverse does not work)
There boot delay circuit, to avoid a power surge current excessive damage to the line
A single sprinkler line the use of an independent design, and using over-current protection circuit, avoiding the burning of a nozzle damaged power lines, and does not have an effect on the normal operation of other jets
